DTU217

79,00

GPRS data logger with optional back-up 3200 mAh battery power supply, programmable GPIOs and serial RS-232/RS-485 ports. Designed for remote consumption metering and monitoring applications. Device collects data from pulse output meters and sensors, stores readings in non-volatile memory and transmits data to dispatching server over GPRS network. Suitable for water, gas, heat, electricity metering etc.

Quick Order
SKU: DTU217 Categories: , Tag:

GPRS data logger with optional back-up 3200 mAh battery power supply, programmable GPIOs and serial RS-232/RS-485 ports. Designed for remote consumption metering and monitoring applications. Device collects data from pulse output meters and sensors, stores readings in non-volatile memory and transmits data to dispatching server over GPRS network. Suitable for water, gas, heat, electricity metering etc.

— 4 x independent confiurable GPIO ports to collect readings from meters and sensors: pulse meters, resistance, 4-20mA current-loop and 1-wire sensors
— RS-232 and RS-485 serial ports
— 3.6V, 5V, 7.5V, 12V outputs
— Configurable polling frequency: 2Hz/20Hz/100Hz
— Dual SIM card slots
— Data transmission over GPRS/TCP connection on a configurable schedule
— Easy local configuration via mini-USB port
— Remote configuration via free cloud platform iot24.eu web interface
— Free Cloud platform iot24.eu ensuring remote access to data via web interface
— 7-30 VDC power supply
— Built-in 3V battery, providing data collection for at least 150 hours if the external power is turned off
— Built-in 3.6V battery, providing autonomous data logger operation up to 4 (10) years if the external power is turned off

Specifications

 

SPECIFICATIONS
ENCLOSURE TYPE Type 2 (metal, IP30)
Dimensions (L x W x H) 97 x 82 x 36 mm
NETWORK PARAMETERS
GSM GSM/GPRS 850/900/1800/1900. GPRS class 8/10/auto (up to 12) configurable. Rate (DL/UL): 85,6 kbps
IO PARAMETERS
GPIOs (IO1-IO4) x4 (configurable): pulse counter, high-speed pulse counter, signal input, leakage sensor, temperature sensor, NAMUR, 1-Wire, 4-20 mA current loop, CO2 sensor, load control, engine hours counter, opening sensor
Input Polling Frequency 2Hz:min. pulse duration – 500ms, max. pulse frequency at the input – 1Hz;
20Hz: min. pulse duration – 50ms, max. pulse frequency at the input – 10Hz;
100Hz: min. pulse duration – 10ms, max. pulse frequency at the input – 50Hz
Input Conditions connected, disconnected, short circuit, break
Input Resistance Range 10 – 100 kOhm
OTHER PORTS
Power Output x4: 2-3,6V, 5V, 7,5V, 12V
USB 1 x mini-USB B
Serial Ports 1 x RS-232, 1 x RS-485
Data Bit 7, 8
SIM 2 x mini-SIM
WM-Bus under development
POWER SUPPLY
Main power supply source DC 7 ~ 30 V
Backup power supply source LiSOCL2 3.6V battery, 3200 mAh
MECHANICAL & ENVIRONMENTAL
Weight 220 gr
Mounting DIN rail, wall, table rubber feet
Operating temperature 10…+50°C
Warranty 2 years

Downloads

Documentation

Datasheet. ADGT DTU Data Logger Series. rev.1.1 (2020-12-21)
Declaration of Conformity. DTU GPRS Data Logger
DTU Remote Data Logger Series. Data Transmission Protocol. rev.1.7 (2020-11-27)

Ordering Information

Product Codes

PRODUCT CODE NETWORK TYPE ANTENNA/ANTENNA CONNECTOR
DTU1xx – plastic IP65 sealed case 76x65x35
DTU110 GPRS Internal 2-5.2dB flexible antenna
DTU111 GPRS External 3dB antenna
DTU117 GPRS External SMA(f) connector
DTU120 NB-IoT Internal 2-5.2dB flexible antenna
DTU121 NB-IoT External 3dB antenna
DTU127 NB-IoT External SMA(f) connector
DTU150 LTE Cat M1 Internal 2-5.2dB flexible antenna
DTU2xx – metal IP30 case 97x82x36
DTU217 GPRS External SMA(f) connector
DTU227 NB-IoT External SMA(f) connector
DTU257 LTE Cat M1 External SMA(f) connector
DTU287 GPRS/NB-IoT/Cat M1 External SMA(f) connector
DTU4xx – plastic IP65 sealed case 145x115x55
DTU413 GPRS Internal SMA(f) connector
DTU423 NB-IoT Internal SMA(f) connector
DTU453 LTE Cat M1 Internal SMA(f) connector
DTU483 GPRS/NB-IoT/Cat M1 Internal SMA(f) connector

Available Options

blank

Privacy Policy
Copyright © 2021 All Rights Reserved.